Fireplace and Gas Log Pilot and Ignition Systems

Information Page

Millivolt Ignition System

Millivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote-ready and can accommodate anything from an on/off wall switch to a programmable thermostatic remote. The pilot light can be turned off for extended periods of non-use and then re-ignited when needed. Millivolt systems are the most common ignition type on the market. Be sure to check local code as not all locals codes allow for standing pilot lights.

Electronic Ignition System

Electronic ignition systems generally require the use of 110v / 120v electricity to operate. This type of ignition system includes intermittent pilot ignitions (power is stepped sown) and direct ignitions (uses direct 110/120v electricity). Electronic ignitions all work in much the same way, once the fire is turned on by the user an electronic signal first turns on the pilot light. After the pilot light is confirmed on the electronic unit then it allows for the burner to open. Some electronic ignition units are now including a battery back-up system.

Gas Log and Burner Match Light Ignition

This type of ignition requires that the burner be lit manually with either a match, lighter or some other source. Match light units do not have a pilot light and also has no oxygen depletion sensor.

Gas Log and Burner Manual Ignition

Manual Ignitions use a mechanical or battery operated Piezo ignitor. This type of ignition uses the Piezo to generate a spark and ignite the pilot light. Manual ignition systems include an oxygen depletion sensor on all vent free units for added safety. If the oxygen depletion sensor is not getting enough oxygen then the burner system will automatically shut down.

Gas Log and Burner Millivolt Ignition

Millivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote ready and can accommodate anything from a on/off wall switch to a programmable thermostatic remote. The pilot light can be turned off for extended periods of non-use and then re-ignited when needed. Millivolt vent free log and burner sets include an oxygen depletion sensor. Be sure to check local code as not all locals allow for standing pilot lights.

 

Gas Log and Burner Millivolt Ignition with Variable Remote Control

Millivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions with remote include a specialized remote that is designed to control flame height. This type of remote is only available with this ignition type. The pilot light can be turned off for extended periods of non-use and then re-ignited when needed. Millivolt vent free log and burner sets include an oxygen depletion sensor. Be sure to check local code as not all local codes allow for standing pilot lights.

Gas Log and Burner Intermittent Ignition with Remote Control

Intermittent pilot electronic ignition systems are a battery powered electronic ignition system which include a remote. Intermittent pilot ignitions operate as follows, once the fire is turned on by the user an electronic signal first turns on the pilot light. After the pilot light is confirmed on the electronic unit then allows for the burner to open. Intermittent pilot vent free log and burner sets include an oxygen depletion sensor.

Gas Log and Burner Battery Electronic Ignition System

Operates without the need of a standing pilot.  This compact system sits in your fire box next to the burner system and functions off of 2 D cell batteries. 

 

Types of Fireplaces

Fuel Source:

Wood-Burning: Traditional fireplaces that burn wood logs.

Gas: Use natural gas or propane to create a flame.

Electric: Simulate a flame using LED lights and emit heat.

Ethanol: Burn ethanol fuel for a clean-burning flame.

Design:

Traditional: Classic masonry fireplaces with a chimney.

Modern: Sleek, minimalist designs often featuring clean lines and contemporary materials.

Freestanding: Portable units that can be placed anywhere.

Built-in: Integrated into walls or cabinetry.

Three-Sided: Offer a view from multiple angles.

See-Through: Visible from both sides, creating a dramatic focal point.

Other Considerations:

Ventless: Do not require a chimney or vent.

Direct Vent: Vent directly to the outdoors.

B-Vent: Vent through the wall or ceiling. Open Front

Insert: Fits into an existing fireplace opening.

Stove: A freestanding unit that can heat a room.

Popular Choices:

Gas Fireplaces: Offer convenience, efficiency, and clean burning.

Electric Fireplaces: Versatile, easy to install, and require no venting.

Wood-Burning Fireplaces: Provide a traditional and cozy ambiance.

When choosing a fireplace, consider factors such as:

Fuel source: Your preference and local regulations.

Design: Your personal style and the available space.

Heat output: The desired level of warmth.

Maintenance: The amount of effort required for upkeep.

Safety: Compliance with local building codes and fire safety regulations.

By understanding these factors, you can select the perfect fireplace to enhance your home's comfort and style.